24-Key IR RGB LED Strip Controller (12V, 6A) with Remote

€6.90
€8.90
Save €2.00
Tax included
Stock status: Low
In stock
Quantity

Plug-and-play controller to add colors, effects and dimming to 12V RGB LED strips. The compact control box connects between your power supply and your 4-pin RGB strip and is operated by the included 24-key infrared remote (R/G/B/W quick keys + 16 colors + 4 effects: Flash, Strobe, Fade, Smooth).

Highlights

  • Easy control: ON/OFF, brightness up/down, 16 preset colors, and 4 dynamic modes.


  • For 12V RGB strips: works with common 3528/5050 4-pin RGB LED tapes.


  • Up to 6A total output (~72 W at 12V).


  • IR receiver built into the control box—point the remote at it for reliable response.


  • Compact inline design for quick, tidy installations behind TVs, shelves, cabinets, signs, etc.

Specifications

  • Input voltage: DC 12V


  • Output: RGB, 3 channels, max 6A total


  • Output connector: 4-pin RGB (to LED strip)


  • Control: IR remote, 24 keys (R/G/B/W, 16 colors, Flash, Strobe, Fade, Smooth, brightness ±)


  • Use: Indoor (controller is not waterproof)

Compatibility

  • 12V, non-addressable RGB LED strips (4-pin).


  • Not suitable for 5V USB strips, RGBW/RGBIC/addressable strips, or 24V strips.

What’s in the box

  • RGB control box (12V, 6A)


  • 24-key IR remote

Quick install

  1. Connect a 12V DC power supply (sized for your strip’s wattage).


  2. Plug the 4-pin lead into the strip (match the arrows/“+12V”).


  3. Keep the IR receiver visible; use the remote to set color, brightness, and effects.

Note: Do not exceed 6A/72W total load on the controller. For longer runs, split the strip across multiple controllers or use an amplifier.